Embry-Riddle Aeronautical University on Tuesday announced a partnership with the Advanced Air Mobility Association (AAMA), a nonprofit initiative working with the private sector, universities, government, and other stakeholders to create “road maps” for the introduction of AAM aircraft, tailored for major U.S. cities. Under the agreement, AAMA will leverage the expertise of Embry-Riddle faculty and provide students with opportunities for project collaboration, internships, and more.

AAMA was launched publicly in April and is led by president and CEO Antonio Campello, an Embraer executive of more than 30 years who most recently headed Embraer-X—the company’s innovation arm and technology incubator.

Johann Bordais, president and CEO of Embraer air taxi arm Eve Air Mobility, a spinoff of EmbraerX, sits on the group’s board, which also includes Bristow Group executive David Stepanek and Republic Airways executive Charles Hillis. Both Bristow and Republic are Eve partners.

In addition, AAMA adviser Frank Di Bello previously served as president and CEO of Space Florida, an Eve investor. Michael Amalfitano, who sits on Eve’s board, is on Embry-Riddle’s board of trustees.

However, Campello told FLYING that AAMA receives no funding from Embraer or Eve and is fully agnostic, working with all platforms and OEMs and favoring no company. He said the group has been inviting AAM operators, aircraft manufacturers, industry groups, universities, and city governments to help build the ecosystem needed to bolster a new wave of transportation.

Passenger- or cargo-carrying electric air taxis, for example, will require vertiports, special takeoff and landing sites fitted with chargers and other equipment. Designing, building, operating, and regulating these sites will be a collaborative effort.

AAMA intends to establish “readiness laboratories,” where stakeholders can create and implement a minimum viable product (MVP). Businesses use MVPs, which typically are designed with just enough features to be usable for early customers, to gauge the feasibility of an idea. Essentially, the group is looking to launch a beta version of an AAM ecosystem and receive feedback from customers on how it could be improved.

AAMA will use funding generated from membership fees, grants, events, and fees charged to use its readiness labs to create reports describing how different regions can integrate air taxis and other novel aircraft. Per a pitch deck viewed by FLYING, it will also advocate for key regulations on Capitol Hill.

According to Embry-Riddle, AAMA will work with university faculty that lead AAM programs, such as within the Eagle Flight Research Center. Kyle Collins, an assistant professor of aerospace engineering and the director of the center, said it has been exploring the topic for years.

Embry-Riddle students will also be able to work directly with AAMA members on projects and will have opportunities to intern with the association and its member organizations.

“We’re excited to see our team of experienced professionals collaborating with researchers, faculty, and students to propose innovative and customized solutions aimed at implementing a safe and efficient advanced air mobility ecosystem in cities and regions across the globe,” said Campello.

Separately, Embry-Riddle is collaborating with the Greater Orlando Aviation Authority (GOAA), which manages Orlando International Airport (KMCO), to explore the integration of AAM operations at that site. In addition, researchers are working under a $1.4 million NASA grant to study how air taxis can take off quietly and safely in dense urban environments and turbulent conditions.

It’s unclear how much access AAMA will be granted to those projects, but the organization will hope to glean insights from top aviation experts.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Embry-Riddle Partners to Prepare Cities for Self-Flying Aircraft, Air Taxis appeared first on FLYING Magazine.

The Brisbane City Council last week published a proposal outlining an array of improvements to the city’s transportation system that could be made in time for the Games, with UAM among them. Such a project would require collaboration across all levels of government to install special infrastructure in city centers, including domestic and private airports.

While the proposal does not mention electric air taxis specifically, Australia’s Civil Aviation Safety Authority (CASA) defines UAM as “short- to medium-range and endurance [services] designed for low altitude point-to-point passenger or cargo carrying tasks in, and between, urban areas.”

Among the aircraft that would fulfill these services, according to the regulator, are electric vertical takeoff and landing (eVTOL) air taxis. These outlandish designs can take off like a helicopter and cruise like a conventional plane.

“When we secured the Games, we knew it meant more than hosting for a few weeks: it was a chance to leave a lasting transport legacy for our city,” said Adrian Schrinner, mayor of Brisbane, in the proposal. “The Games present a once-in-a-lifetime opportunity to accelerate investment in our transport network and deliver long-term benefits for our community that are inclusive and accessible to all.”

One eVTOL air taxi manufacturer, Boeing’s Wisk Aero, in July hinted that its self-flying Generation 6 could make its debut in time for the 2032 Brisbane Games. Wisk is collaborating with vertiport developer Skyports Infrastructure, which is building vertical takeoff and landing sites equipped with electric aircraft chargers.

In the opinion of Clem Newton-Brown, CEO of another vertiport developer, Skyportz, the proposal is confirmation that Brisbane is considering hosting flights of electric air taxis such as Wisk’s.

“Brisbane is well suited for waterfront vertistops co-located with ferry terminals, as the [Brisbane] river wraps around the [central business district],” Newton-Brown told FLYING. “But they are also going to need suburban vertistops stretching from the Sunshine Coast to the Gold Coast and into the hinterland.”

In addition to the Sunshine Coast and Gold Coast, the proposal names Brisbane’s Moreton Bay, Scenic Rim, and international cruise ship terminal as potential UAM destinations. The city council said it is exploring direct access to the city center from its key transport hubs and that these routes would complement “future autonomous air taxi services,” which would appear to be a nod to Wisk.

“With eight years to go, the Games present a strong opportunity to showcase the potential of urban air mobility,” the proposal reads. “[The South East Queensland] Council of Mayors is playing a key role in facilitating collaboration between government agencies involved in the planning for urban air mobility.”

Added Newton-Brown: “In Australia, we have strong support from our air regulator, CASA, federal and state governments, but what we need is strong buy-in from local governments, and South East Queensland is currently leading the way.”

The city council expects to receive a commitment from state and local governments to fund the Olympic transportation projects by 2025. A business case would be developed between early 2025 or late 2026, with government approvals, funding, and the delivery of aircraft and infrastructure before the end of the decade. The goal is for the system to be operational by 2031.

“Our plan is sensible, affordable and achievable by 2032,” wrote Schrinner in a post on X, “but it’s going to require a team effort by all three levels of government to ensure Brisbane’s transport network can both cater for the games and cater for our city’s incredible growth.”

Though they did not ferry passengers between venues as originally planned, electric air taxis did soar at the Paris Olympic Games this summer. German manufacturer Volocopter completed two test flights of its two-seat VoloCity design, including one that lifted off in front of the Palace of Versailles. The company did not receive approval in time to fly spectators despite offering for French President Emanuel Macron to be its inaugural passenger.

Electric air taxis are expected to fly again at the 2028 Olympic and Paralympic Games in Los Angeles, where American manufacturer Archer Aviation aims to launch a network by 2026. City transportation officials are preparing for Archer, and potentially others, to fly passengers at the big event.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Electric Air Taxis Could Fly Passengers at 2032 Brisbane Olympics, City Says appeared first on FLYING Magazine.

UAM manufacturers—many of them based in the U.S.—are developing electric vertical takeoff and landing (eVTOL) air taxis, electric short takeoff and landing (eSTOL) planes, and other outlandish aircraft with unique propulsion sources and flight characteristics. These companies have garnered billions in investments and the support of key airline partners, such as United Airlines and Delta Air Lines.

No market has been more welcoming, however, than the United Arab Emirates, UAM manufacturers told FLYING in April at the inaugural DriftX—a two-day event in Abu Dhabi that showcased the latest technology in air, land, and sea transportation.

“There’s nowhere on earth that’s been as positive or receptive to what we’re doing here,” said Nikhil Goel, chief commercial officer of eVTOL air taxi manufacturer Archer Aviation.

Help From Above

Archer and other manufacturers cited partnership opportunities with UAE leadership as a major draw for them to bring their services to the country. Goel said he personally has been visiting the UAE for about a decade, dating back to his time with Uber’s short-lived eVTOL venture, Uber Elevate. Even then, the government welcomed the idea of UAM with open arms.

“Back then it was a dream,” Goel said. “Today, it’s here.”

Archer and fellow eVTOL air taxi manufacturer Joby Aviation, which also has long-standing ties with Emirati leaders, hope to launch service in the UAE as early as 2025—the same year they expect their aircraft to begin operations in major U.S. cities, including New York, Chicago, and Los Angeles. The companies claim these offerings will be cost-competitive with ground-based rideshare services, such as Uber or Lyft.

• READ MORE: Archer Bringing Electric Air Taxis to Los Angeles by 2026

Archer, Joby, and other manufacturers have signed agreements with UAE government and state-backed entities, including the Abu Dhabi Investment Office (ADIO), Abu Dhabi Department of Economic Development (ADDED), Dubai Roads and Transport Authority (RTA), and General Civil Aviation Authority (GCAA). Within them are incentives for hundreds of millions in funding to build ecosystems for eVTOL aircraft.

“There’s been a lot of interest in the region—both here in Abu Dhabi and in Dubai—in this idea of air taxis and what this type of flying mobility can do, for quite a while,” said Eric Allison, chief product officer of Joby.

Chinese manufacturer EHang—which in October achieved the world’s first eVTOL air taxi type certification—and electric seaglider manufacturer Regent Craft are also working with UAE government and state-backed organizations.

“You see what the region is doing with the eVTOLs, with mobility, with building and construction in general…and we’ve only felt supported,” said Billy Thalheimer, CEO of Regent.

Archer, Joby, EHang, Regent, and others have joined Abu Dhabi’s Smart and Autonomous Vehicle Industry (SAVI) cluster—a collection of government-backed research and development, testing, and manufacturing facilities within the city. Already, several of them have committed to produce aircraft within SAVI.

Abdulla Al Marzouqi, director general of Abu Dhabi’s Integrated Transport Center—an affiliate of the Emirate’s Department of Municipalities and Transport—said UAE leaders believe UAM technology will be widespread in the future. They’re looking to get ahead of the curve by attracting both manufacturers and private investors.

• READ MORE: Joby Applies for Air Taxi Certification in Australia

Al Marzouqi said the UAE has made climate policy a priority, creating a favorable regulatory environment for UAM companies. The country aims to achieve net-zero emissions across all industries by 2050, with regulations around renewable energies such as green hydrogen already in place.

Henry Hooi, CEO of eSTOL manufacturer Volar Air Mobility—which in April announced its plans to fly in the UAE—said these policies make the country “a fantastic hub for the potential development of green aviation in the region.”

Long term, Al Marzouqi said the government intends to enact UAM regulations across the Emirates. In the meantime, it will continue to invest in existing transportation technologies to bridge the gap as eVTOL air taxis and other outlandish aircraft come online.

The strategy so far has garnered results. In April, ADIO unveiled the UAE’s first operational vertiport, a temporary installation at DriftX. Vertiports, akin to heliports, are designed to accommodate eVTOL and other electric aircraft with infrastructure such as charging stations. The country also hosted the Middle East’s first passenger-carrying eVTOL demo in May, completed by EHang.

Sooner Rather Than Later

UAE leaders have an urgency to deploy eVTOL and other novel aircraft “sooner [rather] than later,” said Allison, which is an attractive proposition for UAM manufacturers.

Both Joby and Archer, for example, claim they will be ready to fly in the country by 2025—the year they expect to obtain FAA type certification. Saif Mohammed Al Suwaidi, director general of the GCAA, said in October that his agency expects to approve Archer air taxi flights as soon as the company secures the equivalent authorization in the U.S.

Archer CEO Adam Goldstein earlier this year told Aerospace America, “In the UAE, they can make decisions much different than what the regulators here can do.”

• READ MORE: Minnesota’s ‘Jetson Law’ Green-Lights Flying Cars on Roads

Goel told FLYING: “I think it’s really about the attitude. [In the UAE], everyone says, ‘How fast can we get here? What can we do to help?’ There’s nowhere else in the world that’s got that sort of attitude.”

Set Up for Success

Certification is top of mind for UAE leaders. But a massive chunk of the government’s investment is going toward preparing the nation’s infrastructure for an influx of UAM aircraft.

Al Marqouzi said the idea is to set companies up for success by installing vertiports, electric chargers, and other infrastructure before the aircraft begin flying. He said the country is already building a network of electric aircraft charging stations, for example.

In December 2022, the UAE government agreed to a three-year, $40 million investment to build a UAM flight testing and development hub in partnership with VPorts. The same month, it published what it believes to be the world’s first national vertiport regulations. 

In February 2023, Dubai crown prince Sheikh Mohammed bin Rashid Al Maktoum approved plans to develop a nationwide vertiport network by 2026. Construction on the nation’s first fully operational vertiport at Ras Al Khaimah International Airport (OMRK), led by VPorts, is already underway. Another partner, Skyports, is building a site at Dubai International Airport (OMDB).

• READ MORE: Archer Agrees to Potential Air Taxi Sale Worth $580M

U.S. manufacturers are also working directly with these vertiport companies. Joby, for example, is collaborating with Skyports to design, build, and operate three additional vertiport sites in Dubai. Archer and partner Falcon have a similar arrangement, covering locations in Dubai and Abu Dhabi.

“We need there to be lots of places to take off and land,” said Allison. “And the key to making that possible is to make the infrastructure rapidly deployable and very economical…We’re working on designs for modular infrastructure with integrated ground support equipment that can be very rapidly and efficiently and economically deployed to retrofit existing infrastructure in places like parking garages.”

Dubai and Abu Dhabi, for example, have a combined 350 helipads, according to Archer. By simply installing aircraft charging equipment, those sites could become UAM hubs.

“There’s already a lot of existing infrastructure all over the country in both Dubai and Abu Dhabi,” said Goel. “And so as we look at that, we say, ‘A’, we can use that existing infrastructure to our benefit, and ‘B’, there’s a lot of opportunity to build new infrastructure.”

However, Allison acknowledged that there remains “a lot of work that needs to be done to build the ecosystem.”

Market Potential

Beyond the obvious benefits of government support and investment, UAM companies are enticed by the UAE for several reasons.

One unstated reason may be the prevalence of wealth. While Archer, Joby, and other players bill their services as affordable, it could take time for them to become accessible to the average consumer. And the UAE, despite a population composed largely of migrant workers, ranks sixth in the world in GDP per capita. In other words, the country has plenty of premium customers.

“Everyone I’ve talked to here is just salivating at the prospect of being able to get from downtown Dubai to downtown Abu Dhabi in 30 minutes,” said Allison, who noted the UAE’s “incredible economic growth.”

Thalheimer said that Regent was drawn to the country by “a combination of geography, market demands, and then sort of a pro-business and forward leaning approach on innovation and mobility.”

He characterized the UAE as a massive market in the geographical center of the Eastern Hemisphere, rife with coastal population centers. For manufacturers with global ambitions, such as Regent, establishing a presence in such a location can aid in expansion.

“I know that the UAE is going to lead the way,” said Goel. “I know we’re going to be in Abu Dhabi, Dubai, and all across the seven emirates. We see an opportunity to scale hundreds of vehicles across the country, and then take what we learn here and spread it all across the Middle East.” 

This feature first appeared in the July/August Issue 949 of the FLYING print edition.

The post The Middle East: Cradle of Urban Air Mobility? appeared first on FLYING Magazine.

Airbus on Wednesday tapped European helicopter operator and longtime collaborator Avincis as its latest urban air mobility (UAM) partner. The companies plan to develop a concept of operations and mission profiles for the operation of eVTOL air taxis in “target regions” across Europe and beyond.

“eVTOLs will play an important role in our long-term fleet strategy as these technologies continue to evolve to give us further reach and capability in the field,” said John Boag, CEO of Avincis.

Avincis is one of the world’s largest aerial emergency services providers, with bases across Europe, Africa, and South America, including in Spain, Portugal, Italy, Norway, Sweden, Finland, Mozambique, and Chile.

The company’s fleet comprises more than 220 aircraft, of which about 60 are Airbus models. The manufacturer’s CityAirbus NextGen, a prototype for which was unveiled in March, could be the first eVTOL model in the Avincis fleet.

“[Avincis’] established operational network, which is essential to enabling key missions such as emergency medical services, search and rescue, and firefighting, will be a valuable tool to collectively explore the mission potential of CityAirbus NextGen,” said Balkiz Sarihan, head of UAM at Airbus. “Through this collaboration, we will explore how eVTOLs can contribute to missions that save lives and protect communities, a shared goal among our two companies.”

The zero-emission, lift-plus-cruise design is built for a pilot to fly as many as three passengers in urban environments, but it could fly autonomous in the future. It will have a range of about 50 sm (43 nm), cruise at 75 mph (65 knots), and weigh about 2 tons, with a 40-foot wingspan.

The design includes a V-shaped tail, fixed wings, and eight electric propellers, each supplying a pair of electrical power units. During flyover, Airbus says, the aircraft will produce just 65 dBA of noise—about the volume of a typical office.

The cyclic, pedal, and collective controls typically found on rotorcraft will be replaced by a single piloting stick that controls all aircraft axes: a design the manufacturer claims is a first in the helicopter industry. The stick can be used to perform takeoff and landing, climb, descent, acceleration, deceleration, turn, and approach.

Use cases for the air taxi include passenger transport, medical services, and ecotourism. Airbus seeks to certify it in the enhanced category under the European Union Aviation Safety Agency’s (EASA) Special Condition for VTOL (SC-VTOL) regulations. FAA certification would follow shortly after.

CityAirbus NextGen is expected to make its maiden flight later this year and is undergoing testing of electric motors, rotors, flight controls, avionics, and other systems at the company’s test center in Donauwörth, Germany.

At the same time, Airbus continues to set the stage for the aircraft’s eventual debut.

The manufacturer in February partnered with international helicopter and fixed-wing lessor LCI in a collaboration focused on three key areas: UAM strategy, commercialization, and financing. The same month, the company added vertiport developer UrbanV and electric infrastructure provider Enel to its partnership with ITA Airways, the flag carrier of Italy, for a planned air taxi rollout in the country.

Airbus also intends to fly CityAirbus NextGen in Germany, Norway, Japan, and Latin America.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Airbus, Avincis to Explore Europewide Electric Air Taxi Operations appeared first on FLYING Magazine.

The United Airlines partner and Kakao Mobility Corp.—a subsidiary of South Korean conglomerate Kakao which runs Kakao T, a popular taxi-hailing service akin to Uber in the U.S.—signed an agreement that covers the latter’s planned purchase and operation of up to 50 aircraft as early as 2026, beginning in Seoul.

The manufacturer estimates the value of the potential sale, including predelivery payments it expects to receive next year, at about $250 million. Kakao Mobility last year signed a similar agreement with U.K. eVTOL manufacturer Vertical Aerospace.

The taxi-hailing company has also tapped Archer as its eVTOL partner for Korea’s K-UAM Grand Challenge: a multicity, public-private effort to demonstrate eVTOL operations, with an eye toward commercializing those services by 2025. Kakao Mobility will pay Archer a first installment of $7 million this year, followed by a second installment in January, to support the effort. The partners expect to complete a public demonstration later this year.

“We are committed to revolutionizing transportation with Archer’s eVTOL aircraft, ushering in a future of cleaner, faster, and more efficient travel between and within Korean cities,” said Nikhil Goel, chief commercial officer for Archer.

According to Korea’s transport ministry, commuters in the Seoul Capital Area—which, with a population of a quarter of a million people, is one of the largest metropolitan areas in the world and home to half the country’s population—typically spend about 90 minutes per day stuck in traffic.

Archer promises to replace those commutes with estimated 10- to 20-minute air taxi flights, charging for just a few minutes in between. The manufacturer’s five-seat eVTOL is designed for four passengers and a pilot, with a range of about 52 sm (45 nm) and cruise speed of 130 knots.

It claims the aircraft will be cost-competitive with ground-based rideshare services such as Uber, Lyft, and Kakao T, which according to Kakao Mobility has more than 30 million registered users, many of them Seoul.

“The vision is clear—reduce the hours lost in traffic and elevate everyday travel with an electric air taxi service that features Archer’s Midnight aircraft,” said Christopher SungWook Chang, senior vice president of Kakao Mobility.

However, the partners—and the South Korean government—have ambitions to introduce air taxi flights nationwide.

The country’s Ministry of Land, Infrastructure, and Transport in 2021 unveiled the K-UAM Operation Concept 1.0: a blueprint, similar to the FAA’s Innovate28, to commercialize urban air mobility (UAM) services by 2025. Initial flights would be piloted and take place on predefined routes in cities such as Seoul and Incheon, with nationwide introduction of fully autonomous air taxi flights by 2035.

Before then, the government is conducting the K-UAM Grand Challenge to validate the technology.

Kakao Mobility and a consortium that includes electric vehicle charging service LG Uplus, vertiport developer GS Engineering & Construction (GS E&C), and now Archer will be one of three consortiums to participate in public demonstrations under the effort, which seeks to garner public support for UAM services.

One group, which includes flag carrier Korean Air, Hyundai Motor Co., and Korea Telecom, completed the initiative’s first UAM operations demonstration in April. Archer and Kakao Mobility have set a target for their first public demonstration later this year.

Archer through the consortium will also work with regulators to create standards around eVTOL certification and operation. With the help of LG Uplus and GS E&C, the partners plan to construct vertiports, air traffic management systems, and other infrastructure to build a UAM ecosystem in Korea.

Archer competitor Joby Aviation is also part of the K-UAM Grand Challenge and expects to begin demonstration flights this year. The manufacturer in September partnered with SK Telecom—which is supporting it with $100 million in funding—to join a consortium that includes Korea Airports Corporation and Hanwha Systems.

Germany’s Volocopter was the first manufacturer to complete a crewed public eVTOL demonstration in the country in 2021, while California-based Overair last year signed several agreements with Korean partners, including a potential direct sale. Embraer eVTOL subsidiary Eve Air Mobility is also in the mix, having signed an agreement with UAM service provider Moviation for the purchase of its urban air traffic management system.

Beyond South Korea, Archer is looking to introduce Midnight in India, the United Arab Emirates, and U.S. cities such as New York and Chicago.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Archer Eyes Public Air Taxi Demos, Potential Sale in South Korea appeared first on FLYING Magazine.

The manufacturer on Wednesday announced that its EL-2 Goldfinch demonstrator—a two-seat version of the design used in testing—achieved its first piloted “ultra-short” takeoff and landing, lifting off with just 170 feet of runway and touching down with under 114 feet ground roll.

During a test campaign, the aircraft, which utilizes a unique blown-lift design, flew as slow as 25 knots during takeoff and landing. It reached an altitude of 6,500 feet and maxed out with a flight time of one hour and 43 minutes.

Flights took place in April and May at Manassas Regional Airport (KHEF) and Warrenton-Fauquier Airport (KHWY) in Virginia and were piloted by Cody Allee, chief technology officer of ABSI Aerospace & Defense and a former U.S. Marine Corps pilot.

“The aircraft handling at low speeds has been exceptional and is matching our analysis well, building confidence in the predicted capability of the nine-passenger product design,” said JP Stewart, vice president and general manager of Electra. “We’ll continue to develop our technologies, including the ‘thrust-by-wire’ flight control system, to allow us to fly even slower on approach and further improve the STOL takeoff and landing performance in the ongoing test campaign.”

Electra’s Goldfinch demonstrator first flew in November during a test to assess aircraft systems and functionality. Teams then began expanding the flight envelope with slower operations and practicing takeoffs, landings, and approaches.

But the initial demonstration of eSTOL maneuvers represents a major milestone for Electra. The company has made the ability to take off from soccer field-sized spaces the calling card of its flagship model, which like the Goldfinch makes use of blown-lift technology.

Electra envisions the eSTOL serving as a quieter, lower-emissions alternative to helicopters, with fewer infrastructure requirements than fully electric aircraft. It is expected to have a range of 500 sm (434 nm) and cruise at 200 mph (175 knots), faster than most rotorcraft. Use cases will range from passenger transport and on-demand urban air mobility services to cargo logistics, humanitarian aid, and disaster response, the manufacturer says.

To amplify lift, eight electric motors on the wing’s leading edge guide air flows over the wing into large flaps and ailerons, which direct them downward. The result, Electra says, is the ability to take off and land at speeds as slow as 35 mph, reducing the runway requirement to one-tenth that of conventional aircraft.

The eSTOL can be flown in hybrid or all-electric mode. It draws power from a combination of a turbogenerator and battery packs, with the former designed to power cruise flight and the latter takeoff and landing. The manufacturer says this keeps fuel burn and maintenance costs low. The turbogenerator—built to support sustainable aviation fuel, e-fuels, and hydrogen—can also charge the batteries during flight, making ground-based charging systems optional.

Electra hopes to introduce the nine-passenger model to the commercial market by 2028 as a multiengine, Level 3, low-speed airplane under FAA Part 23 regulations.

The company in January surpassed 2,000 aircraft preorder sales, with customers including U.S. operators JSX and Bristow Group and India’s JetSetGo. It also has aircraft testing and development contracts with the U.S. Army, Navy, and Air Force, which are exploring potential military use cases for the design.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Electra Achieves Takeoff, Landing With Under 170 Feet of Runway appeared first on FLYING Magazine.

The FAA on Thursday issued final airworthiness criteria for the company’s Midnight Model M001, making the aircraft only the second eVTOL air taxi to achieve that regulatory milestone in the U.S. The approval lays out the standards the regulator will use to gauge the aircraft’s ability to integrate into U.S. airspace. Archer aims to launch Midnight air taxi routes in New York and Chicago in partnership with United Airlines as soon as next year.

The manufacturer’s unique, zero-emission aircraft is designed for a pilot to fly as many as four passengers on back-to-back, 10-to-20-minute flights. The air taxi takes off vertically like a helicopter but cruises at up to 150 mph (130 knots) using a combination of fixed wings and forward propellers. Its optimal range is 10 to 50 sm (8.7 to 43 nm), but it can fly as far as 100 sm (87 nm) on a single charge.

Midnight has a total of 12 propellers, six of which are “tilt props” that can be positioned vertically or horizontally to aid in takeoff, landing, or forward flight. Propulsion is generated by six proprietary lithium-ion battery packs, each powering a pair of electric engines. The result, Archer claims on its webpage, is flights that are “up to 100 times quieter than a helicopter.”

The air taxi uses fly-by-wire flight controls and will be certified in the powered-lift category, a relatively new classification that still requires final FAA regulations on pilot certification. Archer claims it will ultimately be cost competitive with ground-based rideshare services, such as Uber and Lyft, on trips to and from urban centers and airports.

The FAA in December 2022 issued Archer’s proposed airworthiness criteria, allowing stakeholders and members of the public to comment on the prospective certification requirements. Competitor Joby Aviation received its own proposed requirements one month prior and is the only other eVTOL manufacturer to obtain final airworthiness criteria from the regulator, issued in March.

Archer’s finalized criteria are scheduled to be published in the Federal Register on Friday, where they will be visible to the public.

“Midnight is one giant step closer to taking passengers into the sky in the coming years in the U.S.,” said Billy Nolen, chief regulatory affairs officer at Archer and a former FAA administrator. “Thank you to the team at the FAA for their continued hard work in support of making the electrification of aviation a reality.”

The issuance of final airworthiness criteria allows Archer to proceed to for-credit flight testing with the regulator, a key step in the type certification process. For-credit testing will allow the FAA to gauge Midnight’s performance against the standards released Thursday, which could result in the aircraft being deemed safe to fly in U.S. skies.

Archer in February began building three type-conforming aircraft prototypes to be used in those evaluations. The manufacturer said Thursday that the first of those models will begin piloted flight testing later this year, followed by for-credit FAA testing.

“[Thursday’s] milestone adds significant momentum to Midnight’s certification program as we further ramp up our for-credit testing efforts with the FAA,” said Eric Wright, head of certification for Archer.

So far, only China’s EHang has managed to obtain type certification for an eVTOL air taxi from an aviation regulator, the country’s Civil Aviation Administration (CAAC). The manufacturer in December made the world’s first passenger-carrying eVTOL flight, completing a pair of commercial demonstrations in China.

German manufacturers Lilium and Volocopter also aim to launch commercial air taxi services in the next few years.

But Archer and Joby’s models are expected to be the first to take flight in the U.S., starting with major metro areas such as New York, Chicago, and Los Angeles. The companies have partnerships with major U.S. airlines, Archer with United and Joby with Delta Air Lines, though Joby intends to operate its own air taxi.

The manufacturers now have about a year and a half to meet their stated launch target of 2025. But the publication of final airworthiness criteria certainly gives them a lift.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post FAA Issues Final Airworthiness Criteria for Archer Midnight Air Taxi appeared first on FLYING Magazine.

The manufacturer on Tuesday signed a memorandum of understanding (MOU) with Mukamalah Aviation—a subsidiary of state-owned oil and gas company Saudi Aramco that according to Joby operates the world’s largest fleet of corporate aircraft—to introduce its eVTOL air taxi in the country.

Mukamalah serves 13 airports across Saudi Arabia with multiple fleets comprising a total of 55 aircraft. The operator manages nine of these locations in addition to more than 300 onshore and offshore helipads.

JoeBen Bevirt, founder and CEO of Joby, and Captain Khalid Al Natour, CEO of Mukamalah, signed the agreement, which may culminate in the direct sale of Joby aircraft to Mukamalah, at the Future Aviation Forum in Riyadh.

The MOU builds on Joby’s agreements with the leadership of Dubai and Abu Dhabi to fly in the neighboring United Arab Emirates—which is quickly becoming a hot spot for eVTOL activity—as early as 2025.

“Saudi Arabia presents a remarkable opportunity for our technology, and the scope and scale of Mukamalah’s operations make them a natural partner for us,” said Bevirt.

Joby’s flagship air taxi is designed for a pilot to fly as many as four passengers at up to 200 mph (174 knots), with a range of 100 sm (87 nm). Flights will largely be based out of vertiports installed at locations such as airports and hotels, generating a fraction of the noise produced by helicopters, the manufacturer says.

The company intends to operate its own aircraft in markets such as the U.S. and UAE, contrasting with competitors such as Archer Aviation. But Joby says the direct sale of aircraft to operating partners, such as Mukamalah, is part of its commercialization strategy.

The agreement will include Saudi Arabia’s General Authority of Civil Aviation (GACA) and other local aviation stakeholders “to expedite Joby’s entry into the Saudi Arabia market.”

“We are proud to be working together with Joby and Mukamalah on the regulatory framework necessary to support the introduction of eVTOL aircraft,” said a GACA spokesperson. “These initiatives will help the Kingdom of Saudi Arabia meet its climate goals and steer the nation towards a sustainable future.”

Joby first announced its plans to fly in the Middle East in February, signing a definitive agreement with Dubai’s Road and Transport Authority (RTA) to launch air taxi operations in the UAE as soon as 2025. 

The company said the partnership gives it “exclusive” rights to operate air taxis in the Emirate of Dubai for six years following the start of service. However, competitor Archer Aviation—which has its own plans for Dubai and the UAE—believes it will have no issue operating in the Emirate.

Joby expanded its plans for the UAE to Abu Dhabi in April, partnering with the Abu Dhabi Investment Office (ADIO) and other local stakeholders to establish its services nationwide. The company teased the possibility of air taxi routes connecting the nation’s two largest cities, offering 30-minute trips.

ADIO is also collaborating closely with Archer, EHang, and other eVTOL manufacturers eyeing service in the country, offering them financial incentives to localize manufacturing and other operations.

As Emirati leaders push to make the nation a leader in urban air mobility (UAM), it appears the Saudi government may have a similar goal.

The Arab Center Washington DC characterizes the relationship between the two countries as a “rift,” driven by a desire to become the dominant economic power in the region. Both nations rely heavily on their oil industries and have turned to tourism to diversify revenues.

Saudi Arabia made sustainability a pillar of its Vision 2030 plan to diversify the country’s oil-dependent economy. Saudi leaders hope to reach net-zero carbon emissions across all industries by 2060 and have already enacted regulations, such as around hydrogen production, to help get there.

“Over the past years, we have already invested in a more sustainable future, including taking steps in sustainable aviation fuel [SAF] testing, supporting the development of hydrogen solutions in the aviation ecosystem, and supporting the Kingdom’s green initiatives by delivering sustainable aviation solutions,” said Al Natour.

Earlier this year, The Helicopter and Jet Company, a Saudi state-owned commercial helicopter operator, partnered with Houston-based Bristow Group to explore the introduction of eVTOL aircraft in the country. Bristow has orders for as many as 50 such models from Vertical Aerospace and as many as 55 from Beta Technologies, as well as up to 50 Electra.aero hybrid-electric short takeoff and landing (eSTOL) aircraft.

German manufacturers Volocopter and Lilium are also eyeing eVTOL networks in Saudi Arabia. The former received an order for 10 VoloCity aircraft to be flown in the planned industrial, residential, and tourist zone of Neom, while the latter agreed to sell as many as 100 eVTOL jets to Saudi flag carrier Saudia.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Joby Lays Plans for Electric Air Taxi Network in Saudi Arabia appeared first on FLYING Magazine.

The company on Thursday said it is moving to the next phase of flight testing using production prototype aircraft, the first of which came off its pilot production line at Marina Municipal Airport (KOAR) in California in June. The company on Monday rolled out a second production prototype. Until now, Joby had only flown tests using two preproduction air taxi prototypes.

So far, the U.S. Air Force is the only Joby customer to operate a production prototype as airmen are deploying the manufacturer’s first model for logistics and other missions during joint testing at Edwards Air Force Base (KEDW) in California. Joby says its second prototype will soon join the first at Edwards and so far has committed to two further aircraft deliveries to MacDill Air Force Base (KMCF) in Tampa, Florida.

Now, though, the manufacturer is ramping up to perform its own production prototype testing ahead of for-credit evaluations with the FAA.

Joby in 2023 completed 30 for-credit tests of the air taxi’s structures and components. But successful for-credit testing of the entire aircraft would represent a key step toward the pinnacle of the eVTOL air taxi industry: type certification.

“Our preproduction aircraft were the second full-scale generation of Joby’s design, and their performance met or exceeded our predictions throughout the program, successfully achieving our targets for maximum range, speed, and a revolutionary acoustic footprint,” said JoeBen Bevirt, founder and CEO of Joby.

The manufacturer’s flagship air taxi is designed for a pilot to fly as many as four passengers on trips up to 100 sm (87 nm), cruising at 200 mph (174 knots). Unlike competitors such as Archer Aviation, Joby will operate the aircraft itself in partnership with Delta Air Lines.

The company is eyeing commercial urban air mobility (UAM) routes in and around large U.S. metro areas, such as New York and Los Angeles, starting in 2025. But that target will hinge on its success in for-credit evaluations.

Joby’s two preproduction aircraft together have flown more than 33,000 miles over the course of more than 1,500 test flights, 100 of which had a pilot on board.

These included the first electric air taxi exhibition flights in New York City in November, when the company’s second preproduction model flew from the Manhattan Downtown Heliport over the Hudson River. Another demonstration in 2021 included a 154.6 sm flight on a single charge.

“Over the past four years, we thoroughly tested and studied our aircraft in flight, from precision landing and outwash to human factors,” said James Denham, chief test pilot for Joby. “We often flew multiple flights per day, demonstrating our ability to fly in a wide variety of weather and operational conditions.”

Since October, the company has been flying preproduction prototypes with pilots on board. That month, four Air Force test pilots completed the eVTOL’s first crewed transition from hover to cruise flight. The crewed test program includes 31 flights over a span of two days, completed at the start of 2024 in partnership with the FAA.

Joby has also entrenched itself with NASA, working with the space agency to evaluate air taxi traffic and noise. The ability for eVTOL aircraft to fly alongside other aircraft at low volume is considered essential for UAM services, which are largely expected to take place over cities.

“Learnings from the flight test program have been invaluable to our certification program and to the broader development of regulatory frameworks around electric VTOL aircraft, validating the performance, safety, and acoustics of our design while providing insight into daily operations and maintenance,” said Bevirt.

Joby competitor Archer Aviation is also looking ahead to for-credit testing. It expects to begin those evaluations later this year following the production of three type-conforming air taxi models, which is already underway.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Joby Advances to Testing with Production Prototype Air Taxi appeared first on FLYING Magazine.

The German firm announced the first public unveiling of its full-scale Lilium Jet will take place at the annual European Aviation Business Convention and Exhibition (EBACE), which runs from May 28-30 in Geneva.

The company says its showcase, which will also feature the aircraft’s charging infrastructure and a flight simulator for visitors to try out, will be its largest presence yet at the event. It expects to be one of the show’s largest exhibitors.

At EBACE 2023, Lilium debuted a new cabin design for its Pioneer Edition Jet: a four-passenger configuration of its flagship model that is on sale in the U.S. for a hefty $10 million.

“We are delighted to return to EBACE this year, a year that represents a major milestone for Lilium as we gear up for the first piloted flight of the Lilium Jet targeted for the end of the year,” said Sebastien Borel, chief commercial officer of Lilium. “Consequently, it is fitting that we are returning to EBACE in a very big way, with our largest presence at the show to date.”

Borel and Andreas Pfisterer, the manufacturer’s head of flight operations and crew training, each will participate in panels at the event.

Lilium at the end of 2023 began production on the first seven Lilium Jet models, which the company intends to deploy in for-credit testing with the European Union Aviation Safety Agency (EASA). Those evaluations will follow the aircraft’s first piloted flight. The move marked a key step toward type certification of the model, which Lilium expects to obtain by the end of 2025.

Though often lumped in with eVTOL air taxi manufacturers such as Archer Aviation and Joby Aviation, Lilium has a slightly different use case in mind for its aircraft: regional air mobility (RAM).

The Lilium Jet is expected to cruise at 162 knots on city-to-city trips spanning 25-125 sm (22-109 nm). While Archer’s Midnight and Joby’s air taxi are capable of flying those distances, the companies are more focused on urban air mobility (UAM) services within metro areas, such as New York, Chicago, or Los Angeles.

Accordingly, Lilium’s design employs a configuration seldom seen on eVTOL air taxis, with 36 electric ducted fans embedded in the aircraft’s wings. By contrast, Archer, Joby, and several others are building fixed-wing tiltrotor or tilt propeller aircraft in which the rotors and propellers provide both vertical lift and forward cruise.

Lilium says its design sacrifices some efficiency in hover in exchange for significantly greater efficiency in cruise, since the airframe is not bogged down by tilting rotors or propellers. EBACE 2024 in Switzerland will be one of the first times an aircraft with the unique fan-in-wing configuration is on display to the public.

While the event will take place in Europe, where Lilium is based, the manufacturer plans to sell aircraft to operators in the U.S. market as well.

Already, it has opened sales for Pioneer Edition Jets to individual U.S. buyers, while fractional aircraft ownership firm NetJets in 2022 signed a memorandum of understanding for the purchase of 150 of the company’s flagship aircraft.

In February, Lilium designated a planned 56,000-square-foot vertiport at Orlando International Airport (KMCO) as the hub for its operations in Florida, which is expected to be one of the company’s earliest launch markets.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Lilium to Debut Full-Scale eVTOL Jet at EBACE appeared first on FLYING Magazine.