Mathematically, the term describes the shortest distance between two points on a sphere. Metaphorically, it describes the great arc of a journey that led me to this point in my aviation career—while it wasn’t a direct route, it’s the destination that matters.

My journey began with a flight at age 6 from the College Park Airport (KCGS) in Maryland. Long before I knew there was a FLYING Magazine, I was passionate about flying. The years between then and now were filled with the familiar milestones of all great odysseys–a circuitous route, complete with disappointment and triumph, missed opportunities and eureka moments, and great joy.

As this is both my first column in FLYING and our EAA AirVenture issue, I thought it might be fitting and fun to share some history of AirVenture’s past highlighting just a few projects that I brought to life on the grounds of the world’s largest airshow—the vestiges of some are still visible if you know where to look.

During my Cirrus years, and for a few years thereafter, a fully airworthy SR22 would mysteriously appear in Oshkosh at the Fox River Brewery in the outdoor dining area between the restaurant and the river—3.5 miles from the nearest airport. Back at the show, a 30-foot Cirrus control tower was designed to help visitors locate the Cirrus display from anywhere on the grounds as far away as then-Aeroshell Square.

Years later, after rebranding Columbia Aircraft, pilots flying into Wittman Regional Airport (KOSH) may have been asked by a controller to “look for the Columbia barn” with a 50-foot wide Columbia Aircraft logo painted on its roof near the RIPON intersection. There was also an exciting partnership with FLYING and Sean D. Tucker who flew a complete stock, then-Columbia 400 in an aerobatic routine at AirVenture. 

• READ MORE: The 2025 Ultimate Flying Giveaway

Beyond AirVenture, during the Great Recession, I created FLYING Magazine’s Parade of Planes. The events were designed to shorten and refine the aircraft purchase process by connecting consumers with the necessary resources to make informed decisions by leveraging the top finance company, most knowledgeable tax adviser, and strongest insurance provider.

And when it was time for Gulfstream to launch the truly revolutionary G500/G600 with its side-stick Symmetry flight deck, FLYING was the obvious choice for the dramatic six-page, double-gatefold advertisement inside the front cover showing the dynamic flight deck evolution from Gulfstream I to G500 revealed in imagery. 

Regardless of what the creative branding brainstorm may have been, I always found a way to include FLYING because it was then, as it is today, the best way to reach the aviation enthusiast.

As an aviation journalist, I’ve contributed to both FLYING and Plane & Pilot (both Firecrown media companies), written white papers on aviation technology, and served as editor-in-chief for two other aviation publications. 

For the past 25 years, my work in aviation journalism, marketing, brand management, event marketing, and business development has prepared me for this new FLYING endeavor.

There is no more prestigious title or more respected enthusiast publication with greater longevity than FLYING Magazine, and I am both thrilled and honored to be the editorial director and part of the growing Firecrown family of aviation companies.

Since 1927, FLYING has evolved to be exactly what readers wanted it to be. What hasn’t changed over time is the desire of our team to continue to be the world’s most widely read aviation publication and a knowledgeable source of essential aviation content in print and online. 

On behalf of the entire Firecrown aviation consumer group, thank you for being a FLYING reader. This is your magazine and it’s our job to help shape it into exactly what you want it to be—a trusted voice for all things aviation that engages, entertains, and educates readers about our collective passion: flying.

Thank you for taking the journey with us as we approach 100 years of serving the aviation community. 

This column first appeared in the July/August Issue 949 of the FLYING print edition.

The post The Great Circle Route appeared first on FLYING Magazine.

There will be first, second, and third prize winners, as well as two honorable mentions selected from among the entries. Winners will be published in a special multi-spread feature in the June 2024 issue of Plane & Pilot magazine, shared on the Plane & Pilot website, and each will receive prizes from our sponsors, David Clark, Flying Eyes, Flight Outfitters, and Sporty’s Pilot Shop. 

You may submit your aviation photos directly to the Plane & Pilot online gallery—and then ask your friends and family to vote (or submit their own entries). 

Please note that images involving illegal activities, photographs made by a PIC who should be focused on flying, or air-to-air images are not permissible and may be removed. For more details, visit the photo contest rules and information page. 

The post The 2024 <i>Plane & Pilot</i> Photo Contest Is Now Live appeared first on FLYING Magazine.

Have you ever thought about getting your A&P? Maybe you want to learn more about aircraft systems to become a better pilot. Perhaps you would like to save money doing maintenance on your own aircraft. Or maybe you’re looking for a career change or retirement job. Whatever the motivation, many pilots have considered getting their mechanic’s certificate but don’t know what is involved or how to begin. Getting your A&P just might be more accessible than you think.

Why Get Your A&P?

Obtaining your mechanic certificate, more commonly known as an A&P, for the airframe and powerplant ratings on it, offers many advantages. As pilots, we all need to understand how the systems on our aircraft operate. Beginning with initial flight training, we need to understand how the aircraft, engine, electrical, and other systems function—or malfunction—to ensure a safe outcome in any situation. Having a deeper understanding of aircraft systems can help you make better preflight or en route decisions or simply help you to operate your aircraft more efficiently and take better care of it.

For aircraft owners, the biggest attraction is the cost savings from doing your own maintenance. Even if it’s something you can’t do yourself, you’ll be better informed to evaluate and make decisions about the work your mechanic recommends. In addition to doing your own maintenance, having your mechanic certificate can create the opportunity for some extra income, working part time as aside gig or retirement job.

• READ MORE: King Schools Launch New Aviation Maintenance Program

If you are interested in a career change, there’s never been a better time to find work in aviation maintenance. While the pilot shortage has been widely publicized, alls ectors of aviation are desperate to fill mechanic slots as well. General aviation shops are especially shorthanded, causing lengthy delays in scheduling annual inspections, engine overhauls and other maintenance for aircraft owners.

Requirements

The requirements for obtaining an aircraft mechanic certificate are outlined in 14 CFR Part 65 Subpart D. You must be at least 18 years old; read, write, speak and understand English; and complete the required testing. No medical is required. Like pilot certificates, a mechanic certificate is issued with no expiration date. To maintain currency, you must work as a mechanic or in a supervisory capacity for six months out of the preceding 24 months.

As with pilot ratings, the experience, knowledge and skill requirements are outlined in the FARs and the newly-revised Airmen Certification Standards (ACS), which replaced the existing mechanic practical test standards on September 21, 2022. Applicants must demonstrate experience and knowledge in a range of subjects under three categories: general, airframe and powerplant. The general portion includes topics such as basic math and physics, materials, basic electricity, an understanding of the FARs, and safety. Airframe topics include fuel systems, assembly and rigging, landing gear, sheet metal, and more. Powerplant subjects cover everything engine-related, including piston and turbine powerplant operation, ignition systems, fuel and lubrication, and propellers.

After acquiring the required knowledge and experience, applicants must pass a knowledge (computer-based) test with at least 70 percent for each category. After passing the knowledge test, the applicant will schedule their “check ride,” that is, the oral and practical test (O&P) with a designated mechanic examiner (DME). You must pass the oral and practical tests within 24 months after taking the knowledge test.

The mechanic certificate cannot be issued for general alone; it must be combined with either an airframe or powerplant rating for initial certification. After that, you can complete a separate knowledge and O&P test for the other rating. While getting both airframe and powerplant ratings is not required, as a practical matter, most people do obtain both to give them the knowledge and privileges to work on the entire aircraft.

Privileges and Limitations

Like your pilot certificate, a mechanic certificate is a license to learn. The FAA has designed the requirements to ensure a broad foundation in aviation maintenance. With your ticket in your pocket, it is up to you (or your employer) to seek out information and training specific to the aircraft or equipment you will be working on.

The privileges and limitations of a mechanic certificate are outlined in 14 CFR part 65. Mechanics can perform maintenance, minor repairs, minor alterations and 100-hour inspections as permitted by their rating—airframe and/or powerplant. A&Ps may not work on certain equipment, such as propellers and avionics, which must be serviced at an appropriately certified repair station. Major repairs, major alterations and annual inspections must be performed by a mechanic holding an Inspection Authorization rating (IA).This is an additional rating that can be added after three years’ experience as a mechanic and passing an additional knowledge test.

Knowledge

To become an A&P—also called an AMT, or aircraft maintenance technician—you will need to build a foundation of maintenance knowledge. The Part 147 Airmen Certification Standards detail the specific items you must know and understand. The FAA publishes general, airframe, and powerplant handbooks covering all the required material, and they are available for free in PDF format on the FAA website or can be purchased in paperback from various retailers. Test prep programs and apps are available to help you study for the written and oral tests.

Experience

Part 65.77 states that prior to taking the knowledge tests, applicants must have “at least 18 months of practical experience with the procedures, practices, materials, tools, machine tools, and equipment generally used in constructing, maintaining, or altering airframes, or powerplants appropriate to the rating sought” or a minimum of 30 months’ practical experience for both airframe and powerplant. This experience is typically interpreted as the equivalent of working full-time hours for the given period of time.

Two pathways exist for gaining the knowledge and experience you need to become an A&P: attending a Part 147 AMT school or on-the-job training (OJT) through civilian or military experience. The path that works best for you depends on your individual situation. If you have already served in the military in certain aircraft maintenance roles, you can use your time in the service toward the experience requirements. You will need to present specific documentation of your time to the local Flight Standards District Office (FSDO) for review. Additional information about what is required can be found on the FAA website Experience Requirements page.

The on-the-job route appeals to many people because it can be the most cost-effective way to gain necessary experience because you are getting paid while working in a maintenance facility. The rates for apprentices or mechanic’s assistants are at a lower, entry level of pay than for certified mechanics. However, you have the opportunity to gain valuable industry experience and connections, which are especially helpful if you plan to seek future employment in the field. OJT can be part of a formally structured program at a large repair station or employment working at your local FBO. In some cases, if you are rebuilding or restoring your own airplane under the supervision of an A&P, you can log that time, too.

Whatever your situation is, you are responsible for carefully tracking the hours worked and type of work you do. The FAA does not specify a particular format for documenting your time. You can use an electronic spreadsheet or written log. Maintenance logbooks, just like pilot logbooks, are available from aviation shops and online retailers. Whatever format you choose, you must include the following information: type of maintenance task performed, amount of time spent on each task, and validation by a certificated Airframe and/or Powerplant Technician. Just like the military pathway, when you have completed your experience, you will need to present your documented time to the FSDO for review to receive a signoff to take the knowledge test. The on-the-job training route provides interesting, real-word experience, as you never know what type of work might roll into the hangar.

However, depending on the type of shop you work at and the position you hold, you may get to see a wide range of maintenance issues that meet many of the FAA requirements, or your work may be focused on a narrower range of jobs on specialized systems or equipment. Whatever the case, it is up to you to seek experience with the range of tasks the FAA expects. Similarly, it is up to you to gain the knowledge required through self-study, test prep books and apps, online courses or other instructional tools and prepare for the written, oral and practical tests.

Because it can be a challenge to piece together the necessary experience in a working shop, many people choose the school route. Aviation Maintenance Technician Schools (AMTS) are technical programs that operate under the requirements of Part 147 and design their instructional programs to meet the requirements of the Part 147 ACS. AMTS may be run by for-profit companies, public and private universities, community colleges or other technical schools.

The big advantage of the school setting is that the curriculum is designed to cover the range of FAA-required subjects and tasks in a structured, organized manner. The maintenance ACS dictates the specific knowledge, skills and risk management elements required to pass the knowledge test and O&Ps. Part 147 AMTS programs typically take around two years of full-time attendance to complete, but the actual schedule varies by school. These programs prepare you for the knowledge, oral, and practical tests.

Students who successfully complete the program receive certificates of completion that authorize them to take the knowledge tests. College and university programs also provide opportunities to earn associate’s or bachelor’s degrees by completing additional general education requirements.

When selecting a school, be sure that it is an FAA Part 147-approved program. The FAA website has a search engine that allows you to search for AMTS by state. Because all schools must meet Part 147 requirements, you will learn the same content wherever you go. Factors such as location, cost, schedule and school facilities vary, so you should research and visit the programs that interest you and choose the one that best fits your needs.

Tuition can range widely from $17,000 to $40,000 or more for a two-year program depending on the type of institution. Additional costs include tools, books, lab or materials fees, and testing fees.

Keeping Costs Down

While the costs of attending an AMTS may leave you with sticker shock at first glance, if you know where to look, you can find many ways to defray the expense. By choosing your program carefully, you can cut the overall tuition expense before you even start. All Part 147 AMTS teach the same FAA-required content and prepare you to get your mechanic certificate. Community colleges are usually the most cost-effective, as they have lower per-hour tuition rates than other types of schools, especially for in-district students. Because only a few AMTs operate in each state, you may live in an area served by a community college without a maintenance program. If this is the case, the community college in your district may have a charge-back or joint agreement with a nearby school that has an AMTS, allowing you to attend that school at in-district rates.

Retirees can do even better. In many states, senior citizens can enroll in and attend credit courses at community colleges tuition-free on a space-available basis (additional college, lab or testing fees are not covered). Restrictions vary widely and may limit which programs are eligible for this discount, either by policy or due to high demand and lack of available slots in the program. However, if the program rules and space allow, it is possible to earn your A&P for drastically reduced costs.

Discounted tuition may be available to veterans and active members of the military. Veterans can contact the individual school for information about using their GI bill benefits to pay for tuition. Financial aid, loans and grants are available at most institutions for military personnel, veterans and civilians.

Perhaps one of the best-kept secrets is the number of scholarships available—and you don’t have to be a perfect student or a young person to be eligible. If you’re willing to put in a little time to search for them and apply, there’s money to be found. National organizations such as the Association of Women in Aviation Maintenance (AWAM) and National Business Aircraft Association (NBAA) and numerous maintenance and manufacturing companies offer scholarships every year. Check out the organizations’ websites to learn more.

Sometimes the best place to find scholarships is close to home. While the local organizations may offer smaller dollar amounts, every little bit helps. Most colleges have lists of scholarships available to their students set up by alumni or other donors. Scholarship money frequently goes unclaimed because of lack of qualified, or even any, applicants. Look to your local airport or groups in which you are already involved. Local chapters of national organizations, aviation clubs and museums may offer scholarships—and if you are already involved in these groups, you’re more likely to be considered. 

Getting Started

So, you’ve decided to get your A&P? Where do you begin? For an overview of requirements and answers to frequently asked questions about becoming a mechanic, visit the FAA website.

Next, talk to mechanics and pilots you know. Networking is a great way to learn more about the opportunities out there and anyone who can help guide you. Your own local mechanic may be looking for help in the shop or know someone who is. Plus, they will be able to give you some insight on the industry and day-to-day work.

If you are interested in going to an AMTS, start by searching for Part 147 schools in your area. Then, check the school website and contact the program administrator for information about the program requirements, costs and enrollment.

Ready to start learning? Check out the Part 147 ACS to learn more about the specific knowledge and skills you need. You can start reading up on them in the Aviation Maintenance Technician General, Airframe (Vol. 1 & 2) and Powerplant (Vol. 1 & 2) handbooks.

Editor’s Note: This story originally appeared in the NOV/DEC 2022 issue of Plane & Pilot magazine.

The post What Does It Take to Become an A&P? appeared first on FLYING Magazine.

The demand for aviation mechanics is surpassing the well-documented pilot shortage, with an expected projected need of roughly 690,000 jobs in the next two decades, according to a study by Boeing. 

To address this critical issue, King Schools has introduced a new Cleared for Aviation Maintenance program.

“We’ve been growing a lot over the last five to 10 years…and it’s been wonderful to do that, but we’ve been within this domain of pilots for a long time,” said CEO Barry Knuttila at a press conference at EAA AirVenture in Oshkosh, Wisconsin Thursday. “We had mechanics test prep for the general airframe and powerplant for many years. So we had our toe in the mechanics world.”

“Now, we’ve jumped into the water, gone underwater, and come back up,” he continued. “And we’ve come back up with a curriculum that allows…a school to start up a brand new mechanic school and take mechanics…from zero to turning wrenches with a certificate.”

• READ MORE: 3 Ways to Jump-start Networking in Aircraft Maintenance

The Cleared for Aviation Maintenance product is designed for flight schools, colleges, and universities to integrate into their existing A&P programs or establish new ones. With a focus on the new Part 147 requirements and a user-friendly syllabus, the product seamlessly integrates into existing instructional programs. King Schools offers a free concierge service to guide schools and businesses through the setup process.

“We saw a demand that’s there,” Brian Hough, senior vice president of sales and business development, who was instrumental in the development of this program, said at the briefing. “There’s more mechanics needed than there are pilots. If we look at that trajectory, what’s that going to do to us? We’re going to come to a grinding halt because we are falling short of that.”

“There’re maintenance schools that are out there,” he continued, “but they’re just not able to produce [a solution to] the overwhelming demand.”

So he took that idea to the drawing board, asking how we could change that dynamic. “I couldn’t find a commercially-produced syllabus, short of…test prep, which we already had, that would work for multiple entities,” Hough said. 

Aviation maintenance schools are relatively sparse, but Hough and the King Schools team identified a solution in the exploding flight school business nationwide. There are aviation education programs established and growing across the U.S., and those schools have fleets of aircraft. Fertile ground for educating and training new A&Ps: but how could the dots be connected? Enter Cleared for Aviation Maintenance, which allows learners to complete their course of training at existing schools. 

• READ MORE: Maintaining Your Ideal Aircraft: What Can a Pilot Do?

“This year, if you don’t know, the FAA is putting out grants up to $500,000—you have to apply by August 15,” Hough said. “So make sure you do. If anybody has a particular program, this is a huge advantage for you to teach mechanics.”

The curriculum encompasses a fully integrated home-study course, written exam test prep, and a complete syllabus in compliance with the new FAA FAR Part 147 requirements for aviation maintenance technician schools. The program seamlessly aligns with aviation maintenance programs offered by high schools, colleges, and universities, maintenance schools, and flight schools with aircraft maintenance facilities.

There is also a fast-track option for experienced military crew chiefs without A&P certification. These individuals can now benefit from the mechanics training and, in turn, assist the shop while obtaining an FAA certificate more efficiently.

The home-study course is structured into three units: general, airframe, and powerplant. Learners engage with short video sessions, quizzes, flashcards, and practice tests to make the process more enjoyable and improve retention. FAA-style questions ensure students become familiar with the examination format, and interactive tracking helps focus efforts where needed. Additionally, students gain access to the company’s companion and test prep apps, both allowing for offline functionality.

The post King Schools Launch New Aviation Maintenance Program appeared first on FLYING Magazine.