Since Citation Excel deliveries began in 1998, Textron Aviation (née Cessna Aircraft) has delivered more than 1,100 units, making it the firm’s most successful jet in its 96-year history. Based on the XLS series, the newest iteration of the model, the Ascend, offers a number of features designed to extend the winning streak, including the more fuel efficient Pratt & Whitney Canada PW545D turbofans, an upgrade from the Collins Pro Line 21 to Garmin G5000 avionics with standard auto-throttles, increased payload, and more range. Scheduled maintenance interval shave been stretched to 800 flight hours or 18 months, whichever comes first.

The Ascend has new and larger flight deck and cabin windows, upgraded passenger seats, and improved acoustical insulation to soak up sound. The 8-inch dropped aisle has been filled in to create a flat floor. However, the dropped aisle remains an option for customers needing more center cabin headroom.

The Honeywell RE100 now is approved for unattended operation, freeing both flight crewmembers to focus on essential preflight chores. A host of other upgrades endows the Ascend with levels of comfort, quiet, convenience, and connectivity on par with Textron Aviation’s larger super-midsize aircraft. First deliveries are set to begin in 2025.

—With reporting by Fred George

Dassault Falcon 10X

The growth of the Dassault Aviation infrastructure at the Bordeaux-Mérignac Airport (LFBD) in western France can be attributed to the success of the Rafale fighter series, and the Falcon 7X and 8X, as well as the recent introduction of the 6X—and its upcoming big brother, the 10X. Dassault began parts assembly in 2022 to pre-pare for the final assembly of the first test articles underway this year. The all-composite wing is being built at a dedicated facility in Biarritz.

The 10X, announced in 2021, has had a long slow buildup, fitting for a jet that will be the largest built by Dassault and introduce the largest cabin of any jet purpose-built for the business aviation sector. That cabin features a new design path for the company, breaking out of the traditional mold with bold colorways and seating that looks more like that of a penthouse living room than an aluminum tube. It has already received several nods in international design competitions, including the Red Dot award from the Design Society of the U.K.

With a range of 7,500 nm at Mach 0.85—and a top speed of Mach 0.925—the 10X is powered by a pair of bespoke Rolls-Royce Pearl 10X powerplants rated at 18,000 pounds of thrust apiece and able to run on 100 percent sustainable aviation fuel (SAF). On the flight deck, the 10X gives pilots the FalconEye combined vision system, as well as carrying over the digital flight control system (DFCS) made popular on the 7X. As the Dassault pilots finish up flight tests on the 6X and move to the first 10X test platform later this year, perhaps, we’re certainly eyeing them with envy.

Dassault Falcon 6X

Long before pilots will get their hands on the DFCS sticks of the 10X, however, Dassault’s Falcon 6X will entice them to the flight deck. Now type certified under the European Union Aviation Safety Agency (EASA) and the FAA, the 6X leads the next generation of Falcons with its dual Pratt& Whitney PW812D engines. Rated at up to 14,000 pounds thrust, the powerplants propel the wide-body, long-range 6X to a range of up to 5,500 nm at Mach 0.80 and a max cruise speed of Mach 0.925.

The 6X preserves the relative short-field performance of its predecessors, with the capability to operate out of 3,000-foot runways with a partial fuel load.

The balanced field length for takeoff is 5,480 feet under ISA conditions at sea level and at the maximum takeoff weight of 77,460 pounds.

• READ MORE: We Fly: Dassault Falcon 6X

The 6X showed off its graceful, powerful ability to maneuver at the Paris Air Show in late June at the hands of pilots Philippe Duchateau and Fabrice Valette. Visitors to the display could sit on the flight deck and witness the four large-format displays, two tablets mounted on either pilot side, and roundly shaped pedestals from which to stabilize while entering data into the flight management system. It’s a well-thought-out cockpit design, with pilot-friendly touches in and around the instrument panel, such as EFB mounts. We watched passersby stroll in front of the nose through the head-up display with the FalconEye cutting through the gray and bringing everything ahead of the airplane into sharp focus.

Gulfstream G700

The race to certify the next long-range mount looked neck-in-neck between the Falcon 6X and the Gulfstream G700. With its paperwork filed and everything over but the shouting, the bird from Savannah, Georgia, first announced in 2019 is expected to begin deliveries in the first quarter of 2024.

The G700, which takes its strength from the Rolls-Royce Pearl 700 powerplants, can carry up to 19 passengers—and sleep up to 13—in as many as five flexible living spaces. The 7,500 nm range (at Mach 0.85) puts it squarely in the ultralong category, routinely cruising at 45,000 to 49,000 feet. In the conclusion of the flight test program, the G700 continued to set city-pair speed records. It flew into the European Business Aviation Conference and Expo (EBACE) and Paris on up to 30 percent SAF and marked a memorable flight from Savannah to Tokyo on SAF at an average speed of Mach 0.89.

And what’s in it for the pilot? A familiar Symmetry Flight Deck up front, paired with Gulfstream’s Enhanced Flight System, that you’d find on theG500 and G600, making the G700 a straightforward transition for aviators stepping up.

Gulfstream G800

The higher model number ascribed to the Gulfstream G800—sister ship to the G700—refers to the increase in range customers can expect when the platform debuts in a couple of years. Yes, topping the charts at 8,000 nm, the G800 achieves this on the same wing as the G700 by shortening the length of the fuselage and reducing the number of living areas to four.

The G800, currently in the heart of its flight test program, achieves the target distance powered by the same Rolls-Royce Pearl 700 powerplants, at 18,250 pounds of thrust each, at Mach 0.85. If you want to go faster—and sacrifice 1,000 nm of range—push it up to Mach 0.90. Or just get there fast by taking a shorter segment at Mach 0.925.

Gulfstream’s flight test crew flew the first test article with a finished interior—used for proving those components in worldwide environments and operating conditions—to the Paris Air Show.

A second test aircraft first flew on July 15 on a blend of 30 percent SAF and reached a top speed of Mach 0.935 during the mission.

Sitting up front, the familiar Symmetry Flight Deck offers pilots a total of 10 display screens up front—four large-format ones across the front left to right, and six smaller touchscreen displays that can be configured in nearly endless ways depending on the phase of flight, pilot preference, or during abnormal and emergency operations.

The predictive landing performance system works in the background to help prevent runway overruns—though the G800 is projected to mark a6,000 takeoff distance at its max gross weight of 105,600 pounds.

Gulfstream G400

Close kin to the G500 and G600, Gulfstream’s next answer to the large-cabin midsize question, the G400, takes its lineage from its bigger siblings. The OEM stretched the fuselage to 36 feet, 4 inches and leveraged Symmetry Flight Deck technology from the larger models to create an advanced jet boasting a best-in-class cabin cross section with up to 2.5 living areas, with 100 percent fresh air that is refreshed every two minutes.

Those fortunate passengers (up to 12, sleeping as many as five) will enjoy the G400’s projected 4,200 nm range at Mach 0.85 settings—that’s Geneva to Minneapolis—and a top speed of Mach 0.90 and a maximum cruise altitude of 51,000 feet. And that’s done more efficiently than on previous Gulfstream models. The combination of the advanced Pratt &Whitney PW812GA powerplants, wing with improved aerodynamics, and avionics management should realize up to 30 percent in greater fuel efficiency as compared to a G450 on a hypothetical 3,000 nm journey with eight passengers at Mach 0.85.

The G400 is in development alongside the G800, with its first test aircraft delivered internally and poised for a first flight later this year. Gulfstream predicts the airplane’s entry into service will be in 2025.

Bombardier Global 8000

The gauntlet thrown down in the ultralong-range market appears to be a spitting match between the Gulfstream G800 and Bombardier’s latest entrant in the Global series, the 8000. Yes, that 8000 translates directly into the expected range of the new luxury plat-form—but the Montreal-based OEM wants to not just equal but win on speed. Try Mach 0.94, according to the manufacturer’s latest claims.

And it wants to achieve that speed without sacrificing passenger comfort. Bombardier has developed what it calls the Smooth Flex Wing to blend control and agility with the ability to ride the bumps well. Like its competitors from Savannah, the 8000’s max altitude is 51,000 feet, and it will maintain a cabin altitude of 2,900 feet at FL410. Up front, the Bombardier Vision flight deck on the Global 7500 will assist pilots in managing both short and long segments. Four large-format displays sit between two EFB mounts, supplemented by the head-up display available for both the left and right seat. A fully loaded Global 8000—at 114,850 pounds—is anticipated to need just 5,760 feet for takeoff, with a landing distance of 2,237 feet.

HondaJet 2600/Echelon

In a follow-up to the introduction of the HondaJet 2600 concept—recently rebranded as the HondaJet Echelon— at the National Business Aviation Association’s (NBAA) convention & exhibition in October 2021, Honda Aircraft has made its next move in bringing the new model into its lineup. In June, the OEM revealed that development continues on the project, with its official “commercialization” or plan to pursue type certification on the clean-sheet light jet.

Intended to be a midsize jet in alight jet’s body, the HondaJet Echelon is aimed at a 2,625 nm range (four passengers and one pilot, NBA AIFR) and 450 ktas maximum cruise speed—but at 20 percent better fuel efficiency than other light jets and a 40 percent improvement over midsize models.

FAA type certification should come in 2028, with entry into service as a single-pilot-operated platform. Up to 11 people can be seated on board, with the option for nine or 10 passengers depending on crew requirements. Supply partners include Garmin for the G3000 flightdeck, Williams International and itsFJ44-4C engines, Spirit AeroSystems providing the fuselage, and Aernnova for aerostructures. Fabrication of the first airframe is underway as HondaAircraft completes initial engineering on the program.

Beechcraft Denali

Textron Aviation marked an important rite of passage in any airplane’s development program—its first appearance at EAA AirVenture in late July. The Wichita, Kansas-based OEM flew its third test article to the show in Oshkosh, Wisconsin—called “P2” in company parlance to designate the conforming airplane with a full interior for that phase of the flight test campaign.

There’s a lot you can understand much more immediately than you can with a mock-up. First, the air-plane feels like it stands roughly the same height as its Beechcraft brethren, the King Air 200 series. Once onboard, the ergonomics of the Garmin G3000 integrated flight deck harken to the Cessna CJ series but with the familiarity of the Brand G avionics. The powerplant installation includes FADEC and an auto-throttle—necessary for Garmin Autoland certification.

On the business end, the clean-sheet GE Catalyst engine is proving worthy of the investment in it, according to test pilots. As of May, the program included 26 engines built, with more than 5,400 hours of testing—figures that increase every day. The McCauley prop on the front is helping the combination to achieve even greater fuel efficiency than originally projected. The Denali will be certified with flight into known icing (FIKI) capability, completing what Textron Aviation calls “a jet-like experience.” Still, certification isn’t expected until 2025, recognizing the significant work remaining to bring anew turboprop engine to market.

Extra 330SX

The first production Extra 330SX may not be taking to the skies until next year, but the new single-canopy, aerobatic airplane is already spoken for. At a presentation at EAA AirVenture, company president Marcus Extra introduced Bob Freeman as the first customer.

The Extra 330SX improves upon the 330SC with better cooling up front on the 315 hp Lycoming and a Garmin G3X Touch flight display. The sporty airplane features high-performance ailerons, with 60 percent larger horns and modified wing tips, along with a reduced fuselage length. The combination leads to its stunning roll rate, which the company measures by mounting a Go-Pro in the airplane, taking it out for a series of rolls, then returning that video to the engineering team to calculate the rate.

Other improvements in the cockpit are proposed to deliver greater pilot comfort, including a taller stick with reduced side-to-side travel to better accommodate larger pilots—like Extra, who flew the airplane earlier this summer in a com-petition in Germany for the first time. The first deliveries will take place in2024, with the company ramping up its production space in DeLand, Florida, to meet the challenge.

Van’s RV-15

Van’s Aircraft debuted its first high-wing model at AirVenture 2022. Once more it flew the prototype to Oshkosh for the air show this summer with a few updates made to the still mostly mysterious kit in progress. Most take a bit of sleuthing to determine, but they include changes to the stabilator and anti-servo tab to improve stability and stick forces.

The ailerons have also been reshaped slightly, with hinge points moved, and changes made to the internal control system gearing influence stick throw. Van’s test pilots already report improved stick forces and control harmony.

The prototype stills runs from a fuel tank located in the cabin. Van’s plans to build new wings that will mount the fuel tanks, reported at 60 gallons total, internally, following legacy high-wing designs with this increase in pilot/passenger protection in the event of an accident.

With the wing moving back about 4 inches, Van’s will see benefits to load carrying and CG—and allow for the use of lighter powerplants than the current Lycoming IO-390, though it’s expected to be the core engine.

The airframe features unique, damped landing gear intended to smooth out vagaries in both pilot and runway surface. Van’s is sticking to its previously announced plan* to begin taking deposits 12 to 18 months after the airplane’s debut. It is likely to need at least six more months to get the design pinned down and prepare to build kits.

—With reporting by Marc Cook

*Since this article went to press, Van’s Aircraft has filed for Chapter 11 bankruptcy protection and the timeline for the RV-15 is unknown.

Tecnam P-Mentor

Tecnam Aircraft debuted its P-Mentor at EAA AirVenture 2023, though the airplane is already approved under EASA CS 23, the equivalent to FAA Part 23 certification. The P-Mentor, featured and test flown in FLYING’s Issue 939, should see the agency’s nod in early2024, according to the company.

• READ MORE: We Fly: Tecnam P-Mentor

The P-Mentor is a two-seat aircraft designed to be a primary training platform, equipped with Garmin G3XTouch and GTN 650Xi avionics and boasting almost un-heard-of fuel economy at 3.7 gallons per hour.

This low consumption translates to low operating costs for owners and renters—and means lower carbon dioxide emissions. The P-Mentor’s fuel consumption results in up to nine operating hours between refuelings.

Powered by a FADEC-equipped Rotax 912iSC3 powerplant, the heavier-than-an-LSA P-Mentor shows graceful handling characteristics and docile slow flight and stall behavior. Takeoff ground roll at less than max gross was around 1,000 feet, with a landing roll less than that on a grass strip at the company’s headquarters in Capua, Italy. The comfortable cockpit can also accept a Garmin GFC 500 autopilot for serious cross-country and IFR operations. Several flight schools in the U.S. signed orders for the trainer at AirVenture.

—With reporting by Amy Wilder

Elixir Aircraft

Elixir Aircraft, based in La Rochelle, France, has also posted a sales streak for the training version of its aircraft, with a deal closed in June on more than 100 units—50 on option—with Sierra Charlie Aviation in Scottsdale, Arizona. The agreement caps a growing order book for the OEM as it brings three versions of its single-engine airplane to market.

Most of the models—intended for flight training—feature the 100 hp Rotax 912iS powerplant with a full glass cockpit. Sierra Charlie Aviation plans to integrate the airplanes into its Aviation Career Program, an ab initio course focused on identifying varying learning styles and steering those pilot applicants toward success. The composite airframe is built through the One-Shot manufacturing process to reduce parts count.

Elixir delivered five of its 912iS versions in 2022 for a total of more than 10 made so far by press time. The company was founded in 2015 by a trio of engineers who sought to reduce costs in flight training by lowering parts count and increasing efficiency in training aircraft. The first model achieved initial EASA CS 23 type certification in 2020, with FAA validation pending.

This article first appeared in the September 2023/Issue 941 of FLYING’s print edition.

The post What’s Next in New Aircraft appeared first on FLYING Magazine.

Based in La Rochelle, France, Elixir Aircraft is a fourth-generation Part 23 aircraft manufacturer.

The Elixir is a low-wing, T-tail design. The cockpit for the two-place trainer consists of dual Garmin G3X touchscreens, a GTN750xi, and Garmin GNC355a comms and nav backup unit.

According to the company, the Garmin avionics suite is “built to withstand the rigors for flight training” in addition to offering an aircraft that is more environmentally friendly than its predecessors in the training market as it reduces “carbon emissions by nearly 70 percent compared to other old generation aircraft.”

The company is pursuing FAA Part 23 certification.

The Elixir comes equipped with a ballistic parachute, AoA indicator, double-slotted electric flaps, an explosion resistance fuel tank, and reinforced oleo-pneumatic landing gear and combined nose wheel, which offers a wide track and low center of gravity to minimize bounced landings associated with loss of control accidents and runway excursions.

The cockpit is designed to appeal to the global training market, said Mike Tonkin, worldwide head of sales for Elixir Aircraft. Tonkin noted that the average age of the single-engine piston training fleet is 48 years old.

• READ MORE: Elixir Trainers Land at Airbus Academy Europe

“As we know the aging single-engine piston fleet needs replacing globally,” Tonkin said. “At Elixir Aircraft we feel we have the perfect EASA CS Part 23-certified aircraft to meet the current market requirements. The Elixir is modern, safe, versatile, and extremely cost-effective with an average hourly operating cost of around 50 euros per hour [$53.97] for any ATO/FTO flying around 500 hours per year per aircraft.” 

About the Company

Elixir Aircraft was established in 2015 with a goal to create safer, more economical, and versatile aircraft for the global training market. According to the company, the aircraft are designed to be resistant to technical failures and learner friendly. To that end, Elixir Aircraft uses the Carbon Oneshot, a technology utilized in competitive sailing, to simplify the structures.

According to Elixir, “more simplicity means less failure, therefore more safety, but also less maintenance and less costs.” The company estimates the hourly operations cost for its aircraft to be approximately $60, factoring in fuel and maintenance.

In June, Elixir announced an expansion of its headquarters in La Rochelle to 150,000 square feet. The company plans to produce more than 300 aircraft a year and employ more than 1,000 people by 2033.

The post Elixir Aircraft Glass Cockpit EASA Certified appeared first on FLYING Magazine.

What sets the two-seat airplanes apart is the inclusion of the recently EASA-certified full glass cockpit with a full suite of Garmin avionics, a high-tech feature designed specifically to meet the rigorous demands of professional aviation training. This new design is intended to align with the academy’s dedication to staying at the forefront of technological advancements in flight training.

• READ MORE: General Aviation Has a Great Sustainability Story To Tell

AFAE has also ordered an additional four aircraft, scheduled for delivery in early 2024. Compared to the current fleet of older-generation airplanes, the Elixir 100HP, a fourth-generation aircraft certified under EASA CS-23, offers a remarkable reduction in fuel consumption by a factor of four, accompanied by a 50 percent decrease in noise emissions. 

AFAE is an Airbus subsidiary headquartered in Champniers, France—close neighbors to GAMA member Elixir, located in La Rochelle, France, and established in 2015. AFAE, established in 2006, has accumulated more than 525,000 flight hours and 131,000 simulator hours, and maintains a fleet of more than 100 aircraft. With more than 80 aircraft on firm order and more than 200 preordered, Elixir Aircraft looks to shape the future of light aviation.

The post Elixir Trainers Land at Airbus Academy Europe appeared first on FLYING Magazine.

Elixir Aircraft, based in La Rochelle, has posted a sales streak for the training version of its aircraft, with a deal closed on more than 100 units—50 on option—with Sierra Charlie Aviation in Scottsdale, Arizona. The agreement caps a growing order book for the OEM as it brings three versions of its single-engine airplane to market. 

Most of the models—intended for flight training—feature the 100 hp Rotax 912iS powerplant with a full-glass cockpit. Sierra Charlie Aviation plans to integrate the airplanes into its Aviation Career Program, an ab initio course focused on identifying varying learning styles and steering those pilot applicants towards success.

“Like Elixir Aircraft, we pride ourselves on innovation and safety, and being ahead of the curve,” said Scott Campbell, owner of Sierra Charlie. “This means providing our students with the best and safest tools out there to ensure the highest quality education and training. The fourth-generation Elixir is definitely one of these tools. The simplicity, yet strength of the airplane, like the components built with the OneShot technology, is a game changer. Less than 1,000 references [parts count] in the whole plane and half-a-day, 100-hour maintenance checks means my Elixirs will be flying a lot. And my students already fly a lot!”

Arthur Leopold Leger, CEO of Elixir Aircraft, said: “Speaking with Sierra Charlie, it’s clear both our businesses are focused on commercial and industrial development. We know the demand for the global aviation market, training aircraft and pilot shortage. We aim to work together to do whatever we need to do to meet that demand.”

• READ MORE: Elixir Aircraft Signs Mermoz Academy Order, Plans Sarasota Assembly in Florida

Elixir delivered five of its 912iS versions in 2022 for a total of 10 made so far. The company was founded in 2015 by a trio of engineers who sought to reduce costs in flight training by lowering parts count and increasing efficiency in training aircraft. The first model achieved initial European Union Aviation Safety Agency CS 23 type certification in 2020, with FAA validation pending in the U.S.

The order caps a week in which Elixir also posted orders for four airplanes into Luxembourg to Ald Lux, an aircraft leasing company, and a letter of intent for 10 airplanes to the International Aviation Academy of New Zealand, based in Christchurch.

The post Elixir Aircraft Posts a Sales Streak for Its Trainer appeared first on FLYING Magazine.

In fact, we are already doing it, according to key industry leaders from ZeroAvia, Daher, Textron eAviation, Pilatus, and Elixir, at the General Aviation Manufacturers Association’s luncheon. “GA is the solution to this,” said Kyle Martin, GAMA vice president of European affairs.

The event focused squarely on illuminating that message so that those who were there could spread it beyond the walls of Messe Friedrichshafen—and beyond the confines of the general aviation industry into the greater world that needs to understand it. Rather than being an easy target for blame under the auspices of climate change, GA already demonstrates the innovative answers that are possible. Stopping flying is not the answer—flying in better and more sustainable ways will be.

Eric Hinson, GAMA chairman for 2023 and president and CEO of Simcom International, kicked off the lunch with his observations. “I’m going to begin by talking just a little bit about the importance of GA—and I think that’s an important message that we in the industry need to do a better job of communicating. [GA] is basically a connectivity tool that connects people, product, and services.” Those not in GA see it through a myopic view—the high net-worth individual who gets out of a jet—and not for the intrinsic value it provides to nearly everyone in some way.”

Those companies working on solutions in both short- and long-range segments include, according to Hinson, GAMA members and others which are “working on hydrogen-powered solutions…[and] working on electric propulsion to replace fossil-based fuels—and so I’m very confident that over the next 10 to 15 years we are going to see significant advancements in our capability to replace fossil-based fuel for short-range flying. That’s happening here in Europe as well as in the United States. 

“The other area that is equally important is really focused on long-range flying, because we’re always going to have a power-density problem for some time to come—so the long-range solution there is a lot tougher. And of course, the answer there is sustainable aviation fuel.”

There are several legitimate concerns about the current implementation of SAF both in Europe and North America. The first lies in its composition—what biosource it’s derived from, and whether corn-based, cooking oil-based, or various silage-based processes. A second concern lies in how “green” the process of making the fuel is—such as the source of electricity for the manufacturing plant—and how much energy is used in delivering the fuel from its production facility to the distribution points on airports. As Martin would sum up later in the program, in pointing out the value of the book and claim system that allows operators to take credits for SAF entered into the fuel stream: “Trucking tanks of SAF from a Neste factory in Finland to the south of Spain is not the most sustainable approach.”

A corollary to this lies in the current state of electric propulsion, which we have seen this week in several spots on the show floor at AERO—Pipistrel and H55, for two examples—but both directed at short-hop training flights and perceived by some as having limited value to the marketplace.

It’s easy for naysayers to throw rocks at these efforts, but the fact is we won’t get to a solution unless we work on the problems and try new things.

The State of GA in Europe

Martin followed Hinson at the luncheon with his insights into the status of the general and business aviation industries in the EU and UK, including the recovery post-pandemic and political elements affecting both that return to “normal” and moving forward.

“The great news is that we are powering through the COVID recovery,” said Martin. “We are showing growth across all four main product sectors, whether it’s piston airplanes for the training market, turboprop airplanes for the transportation and air services market…the business jet market is growing and coming back—it’s being held back a bit by supply chain constraints, but many new products are coming to the market and that will help boost numbers in the years ahead. And the helicopter market’s finally coming back.”

In addition, traffic numbers reflect the normalizing of the GA industry, with 2022 IFR traffic numbers showing “strong growth versus 2021,” as Martin noted.

Martin also emphasized the value of GA in sustainability problem solving: “Our industry is absolutely the incubator and the growth engine for sustainable and safe aviation technology.” Yes, it’s simply easier to innovate and iterate using small aircraft—we witness all the time how new tech in our GA cockpits “trickles up” to larger platforms until it makes it onto a Part 25 transport category jet a decade—or more—later. At Oshkosh this summer, you’re certain to see an airline captain gazing wistfully at the instrument panel on an RV-series. The most innovative solutions will happen first in the skunkworks of our GA manufacturers, the labs of small but feisty aerospace startups, and in the hangars of our kitbuilders. The first applications may be limited in scope—but that’s the point. You want to test things on a small batch first.

Industry Panel on Workforce, Energy

In parallel to the discussion of sustainability is attracting the workforce that will develop it. To this end, the discussion turned to an industry panel led by Cate Brancart, GAMA’s manager for European operations and safety. 

The panel featured:

• Cyril Champenois, co-founder and CMO of Elixir Aircraft
• Nicolas Chabbert, senior vice president of Daher’s Aircraft Division
• Jane Lefley, strategy associate for ZeroAvia
• Rob Scholl, president and CEO of Textron eAviation
• Urs Thomann, director of technologies and processes, Pilatus Aircraft

Scholl’s organization—newly formed to consolidate Textron’s efforts in several future-leaning sectors—represents well the human energy derived from a company’s dedication to innovation. “We are seeing a lot of people express interest in coming to work for our organization,” said Scholl, “because everything that we’re doing right now—as you see from this group on stage—is new…For those people who want to take on the challenge in this exciting industry, these projects offer a unique opportunity to really get into something that no one in the world has done before.”

That’s a key part of the GA story we need to tell, according to the panelists.

Specifically, bringing young people into GA OEMs is another goal—and one that Elixir seems to have done naturally, with an average age of 34 or 35, according to Champenois. “We are at a turning point in general aviation,” he said, regarding not only energy sources but the way aircraft are manufactured to reduce parts count and streamline processes. “We feel that [the younger generation] was kind of lost for the past 20 years because nothing was really moving.”

A market-based approach will provide the most practical solutions. “We all know that we have the difficult challenge [ahead] to transition to the alternative fuels,” said Chabbert. “This is something that is a ‘must.’ We all know that this is on our trajectory to become neutral by 2050—it’s a key element to our strategy. But…let’s go back to the roots. What is the market wanting? ‘Cause if we’re just about to propose a bunch of technologies, I think we’re probably going to miss the main thing that we’re doing, [which] is to address the market needs.”

As for attracting new entrants to the workforce, Daher relies upon its apprenticeship program. “We have renewed our workforce, and the way that we do that is through apprentices—we have doubled the number of apprentices about every year, so it is a growing number of new people to us.” The younger generation is environmentally sensitive, he added, “so I think they are also after a project that is going to rehabilitate Earth.” Of the apprentices they engage, 80 percent transition to full-time employment, according to Chabbert.

“Agility is one thing that is going to be important,” said Thomann. “If the workforce is agile in selecting their employers, then the employers have to become agile as well.” A diverse workforce is a critical piece too—and across the industry panel, they discussed how they are helping to grow the applicant pool so that the best and brightest minds get the education they need and become visible to the companies that need their talents. Pilatus has also recently implemented better compensation strategies to help attract and retain the people it wants in the organization—instead of keeping bonuses until the end of the year, they incorporate the higher pay rate in a much more transparent way so that its personnel can plan more accurately.

In order to ensure a diverse talent pool, Chabbert added: “We need to bring in schools—I mean, it is not new, it is nothing that has not been done, it is something that we stopped doing. We have to resume and get the schools into our plans so [the students] can actually practice, and get themselves exposed to the different jobs. With the kind of diversity that we’re talking about, it is data management with a technology-driven approach.”

Telling the GA Story

All of these topics circle back around to one critical concern: Many governments around the world appear to be moving against the GA industry, setting targets for carbon emissions that may not be realistic. If we don’t achieve those goals, will the rug be pulled out from under us? That question was the final one put to the panel—poignant at AERO because of recent movements in the Netherlands’ Schiphol Airport to propose a ban on business jets, and there’s legislation in France seeking to reduce or stop short-haul flights—or the insane idea we might ban flying altogether in order to achieve net-zero.

To combat this, we need to take control of the narrative. “We have to educate… we are not a victim…we have to be proud of saying our story—and say it loud and clear: that is what we do and why we do it,” said Chabbert. “We need to make our story and to praise it.”

Lefley concurred: “I agree with you—I think the industry faces an existential threat ultimately, which is why new technology like what ZeroAvia is doing is so critical. One of the things we need to do is to educate governments and the public about the fact that people are doing this already, and that it can be done safely.

“I think it’s easier to use technology than to force everyone to stop flying,” she concluded.

It’s a global story we must tell, and the examples set in the EU—making progress on regulatory coordination and public understanding—will provide a roadmap for the innovation of the industry to drive us forward.

The post General Aviation Has a Great Sustainability Story To Tell appeared first on FLYING Magazine.